spaceman not music any computer CD !

Iain

If your bought the adaptor for your computer at the same time as your router then I assume it supports 802.11g in which case you should use WPA security as it is stronger than WEP.

You seem to have two computers, one connected to the router by wireless and one by a cable.

Go to the machine that is connected by cable. This is because you will interupt the wireless network when you enable security.

Log on to your router configurator and select Wireless.
Select WPA as the security.
Select either the PSK Hex or PSK String option ond decide on your security key. Make it as random as possible and as long as allowed. Save the key in a text file and transfer this to your wireless connected computer before you enter it in the router.
Copy the key from your text file and paste into router config box. Then click apply.

You will then have to go to your wireless computer, open the wirless properties, set the security to WPS-PSK and paste in your security key. Hopefully, your wireless network will then connect.

Best of luck.

Thanks.Ill give it a go

The Other Machines only give me a WEP Security option.
Changed it WPA on master Computer.But other 2 comps still connect ok with old wep security numbers in

Iain

In that case you are stuck with WEP.

In the router config:-

Select Wireless
Check the WEP security box
Check the Enable wireless security box
Set Authentification Type to Shared
Select the First Key
Set Cipher to 128bit (It looks like your router will support 256 bit but only use this if your computers will also take 256 bit)
Paste your 26 character (longer for 256 bit) Hex string
Click the apply button.

Set up computers.

Speed Test for Broadband:

I have been upgraded to 2Mb broadband (maybe!). When I use my usual speed test site (http://myspeed.visualware.com) it tells me that I have only a download speed of 1.25Mb (tested at various different times).
I queried this with my supplier BTYahoo and they pointed me to their speed test which downloads specified size files. As an example, I can download a 10Mb file is approx 45/50 seconds which I reckon is about right for 2Mb.

Is there another site that tests speed of connection. I never doubted the visualware site before when I had 1Mb

www.pcpitstop.com

Finally managed to security enable my router thanks in part to the postings here (and thanks Iain for your telephone offer - rang, answering m/c and you don't have a money am e mail link). Turns out the router needs restart on change of settings - just clicking "apply" is not enough. Why can't the manuals make this clear - gurrr.

Having a prob with my wireless laptop. It connects to wireless routers at work but it has stopped connecting fully at home. I get the message "This connection has limited or no connectivity" Signal strength is fine, clicking repair the connection doesn't work. Help!

7thfloor, http://www.adslguide.org.uk/ is probably the best since it is based in the UK and will be more accurate (most are in the US). There is also a way to do a speed test with BT wholesale thereby avoiding the ISP and any delays they may be introducing. Details are somewhere on the ADSL guide site.

SC

The most likely causes are that it has lost the security key of can't find a DHCP server.

To access the BT Wholesale test, bypassing your ISP:

1. Change the login your ADSL modem or router is using to speedtest@speedtest_domain, the password can be anything.

2. Browse to http://www.speedtester.bt.com, enter your telephone number and run the test.

This is really only useful if you suspect your ISP is not performing as it should. Bypassing it enables you to check what it should perform like in theory.

Speedtesting : Thanks Kayak and Robber.

PC Pitstop says I'm downloading at 936kbits/sec & Bt says it's 1426 Kbps. Confusing or what?

BT test also says :

BT would regard the speed ranges shown below as normal service:

For 250kbps End Users speeds between 50 - 250kbps.
For 500kbps End Users speeds between 100 - 500kbps.
For 1000kbps End Users speeds between 200 - 1000kbps.
For 2000kbps End Users speeds between 400 - 2000kbps. (What a range!!!!)

Edit: Going back to my original speed tester. Visualware says that at 1.25Mb (which is what it says my speed is) I would be able to download 10Meg file in 1 minute, yet BT support is saying that 10 Meg file will take approx 50 seconds with 2Meg service.
Different standards???? I thought it was all pure maths!

7thfloor, you have to remember that the internet is a dynamic medium, you do not have direct point to point connections and information is being routed, there are many different routs that data can go to get between you and wherever you are accessing. When you add in the load on your PC and on the server hosting the pages or files plus possible bottlenecks with some routers it end up being very variable.

Optimist, thanks. I'm sure that's it having thought about it. I connected it to father-in-law's security enabled wireless router and the problem has occurred since then. I'll make mine the same security key as his and that should do it - running the same router. Will report back :-)

7thFloor, I would not place much reliance on the PC Pitstop or Visualware results since their servers are in the US and transatlantic bandwidth will play a part. ADSL Guide (at http://www.adslguide.org.uk/tools/speedtest.asp) is UK based and pretty reliable, BT will be the most reliable but excludes the ISP effects.

Try ADSL Guide and BT at night (after 11pm) and they should approach 1800-1900 kbps. You'll never get the maximum 2048kbps since there is overhead in the TCP protocol. During the day it will tend to vary down from the maximum but if you are getting 1426 kbps consistently I would certainly complain.

Ensure however that before you try the speed test you close all running windows and anything that might be using the internet.

7th floor, I would also normally recommend adslguide.org for the same reasons as Kayak but have found that their speed check wasn't working for me today. Hope you have better luck.


Neil

adslguide speedcheck seems to have been very overloaded recently, it often says its not available due to max number of tests being run, i agree with the others thats its about the best quick checker.

Another lap top gone tits up!
Got one with a blue screen, a load of technical mumbo jumbo preceeded by "kernal_data_inpage_error"..cant keep throwing these poxy lap tops away, must be me?
This ones a Dell Inspiron 8500
Got this problem before on one i chucked, was told by the guy in the shop "it was probably caused by a device driver"..i just said thanks and walked out none the wiser, is it fooked or can i cure it, it wont even switch off?
Please answer in a style to be understood by a simpleton!

Optimist, all sorted now. Have used the same security code as my father-in-law's wireless router - problem occurred because it was the same type as mine but the laptop couldn't differentiate between them.