cheers baz

still cant figure it out i will have to contact a pc company tommorow

thanks again

I have just bought and set up one of these:



A Vigor 2600w ADSL/ISDN Wireless router

I am using it as an internet gateway over ISDN. The box dials up the Internet for me and I can access the net via a direct ethernet connection to the box or wirelessly to the box.

My question is: I have always accessed the Internet direct from my PC and with Windows XP I've been using its firewall option for all internet connections. Now the router is dialling the connection - it has some sort of firewall built into it. I have activated the XP firewall protection on the Wireless Network Connection (a belkin card) in the Network Connections bit in XP, but am I really protected? Is the router still the weakest link and stuff could get through?

Confused of Hambledon

You should have your XP firewall turned on as well on the network connector

D.

Good morning,
Could anyone please help with:
WinME PC and both scandisk and defrag won't work. This followed on from Word not opening due to low systems resources even with nothing else running!
I've managed to get Word working ok somehow. System Restore had been disabled but everyone in the family assures me they didn't disable it.
It's a "spare" family use PC not one my trading machines.
Thanks
Mr. Charts

Croc,

What are the system requirements for your analysis software please? Is it a standalone program or is it a file driven by spreadsheet or database software?

edit: Basically I'm not bright enough to build a database/spreadsheet myself from scratch. Would I be able to take your database, and perform a MA and/or RawK and/or RSI calculation on it for all 2500+ stocks and then filter them according to my other criteria?

Could some kind guy remind how, on XP, I restore the system to how it was at a previous time and date. I have done it before but can't find the darned thing now.
tia

hawkeye - START - PROGRAMS - ACCESSORIES - SYSTEM TOOLS - SYSTEM RESTORE.

Thanks a bunch, skinny. Now going to write out a 100 times, "I it ain't broke, don't fix it".

Good Morning all,

Help required please on freeserve when i use there outlook express to check email it gets cut off after about a minute and have to log on again this is happening all the time,as you guess this is totally pi**ing me off.

Can some kind person offer any help please..:-)

Rick..

Rick, suggest you may have a fault in outlook express, try reinstalling it either from Freeserve disc or from a magazine cover disc, should overwrite and save original settings but keep a note of them just in case!

Rob,

Thanks for the info will have a look at it in the morning,hope you are keeping well looking forward to meeting every one again up north.

Rick.....

just Loaded Win XP Pro..Will not load Streaming page says needs java ?
can anybody help.

Found & Downloaded Java from your site...everything fine now.
Thanks for your site Croc :)))

Thanks again Alan

K tough problem.

I have a proxy/firewall installed.

Real player, Sharescope, MSN, Internet telephony, everything works.

Except D4F MM5.

what port do you input to get it to work ?

I have tried 1080 and 8080.
I know my server's IP address.

The strange thing is the old version works fine without me having to input anything under proxies....

Repeat:
Good morning,
Could anyone please help with:
WinME PC and both scandisk and defrag won't work. This followed on from Word not opening due to low systems resources even with nothing else running!
I've managed to get Word working ok somehow. System Restore had been disabled but everyone in the family assures me they didn't disable it.
It's a "spare" family use PC not one my trading machines.
Thanks
Mr. Charts

Anyone please?

mg,

Sorry, I did not spot your post before.

Just registering domains isnt enough to be able to get email working on them.

You need to have the domains hosted by a company, and they need to either set up email forwarding and web forwarding for the domains (in which case you choose which email address or website it points to), alternatively, and what will give you greater flexibility would be to have that company do the web/email hosting for you. However this is normally the more expensive option...

I personally use XCalibre for all my dns hosting, and I know a number of friends who use them too without any problems.

If you have any other questions regarding this, please email me: jonathan@moneyam.com and ill be happy to talk some more about it...

J.

Mr Charts

Is your anti-virus software up to date? Some time ago I had a number of the variations of the nimda virus. They manifested themselves by making word behave very strangely (odd templates, unable to save doc's properly, low resources messages) and in a general degradation of the system performance. You can get fixes from the Symantec database if that is the problem. Not a tech person so no other suggestions I'm afraid.

Regards
Rob

Can anyone help with a simple Access query (no pun!) please?

My Access experience is "beginner level", so any help needs to be explained in detail. I'm using Access 2002.

The requirement is to export a simple Access report to a series of static html pages. The report has no header or footer and I have used design view to lay out elements (fields) from the query in the report detail section.

I would appreciate help on the following:
(a) When exporting the report to html, the created html files retain the page setup characteristics of a real printer (ie each html file contains the same amount of data/records that would be on an A4 printed page). How do I set the report to ignore this page size and put more data into each html file?
(b) When the html files are created, the report detail layout changes slightly (as the html table definition does not fully reflect the complexity of the query design layout).

Advice on either problem would be much appreciated, as would details of any website that provides information on using Access. (I've already searched the MS site without much success.)

many thanks,
rt.

Robb,
tnx for your help, but no. I use symantec live update anyway
Still got the same problem
Mr. Charts

Hi - I'm sure I've had the answer to this but I can't find it.
I have a dual head graphics card with an analougue and digital output. In order to run to analogue monitors, I need to get an AVI converter cable??
Any comments welcome - I seem to remember Big Al mentioning this but I'll be buggered if I can find it! (metaphorically speaking of course)

Mr Charts
Sometimes you have to many programs running at startup.
Check in your start\programs\startup and move all entries into another directory. Then check if this has helped your system rescources. You can also download a program from my site www.ftsedow.com in the software zone called xsetup which allows you to disable startup programs. If this does not work I suggest a clean reinstallation
Regards
David