for more information about stanelco click on the links.

driver's research page link
http://www.moneyam.com/InvestorsRoom/posts.php?tid=7681#lastread
website link
http://www.stanelco.co.uk/index.htm

Far be it for me to put a dampener on the achievements of SEO of which I am a modest shareholder, and thus have every wish for its success, but I think there is no harm in knowing what the opposition has up its sleeve. The link below to READY MEALS info gives a good idea of what laser sealing is all about.
http://www.readymealsinfo.com/showcase/results.asp?txtContent=7430

garyble - my purpose is to post important links for people to do their own research - this latest news on Laser sealing can explain many things - the reason for the rush for US engineers when no orders for example - SEO would have known about the Laser success in March - it also explains the AGM comment of "standing still and losing" - it is of great importance for an SEO holder to research the potential of this new system - why buy a car for gas saving now that does 100 miles per gallon if you can wait a few months and get one that does 200 mpg and faster and more flexible.

The ramp crew will encourage you to squelch me - of course - they will not squelch me as you should never squelch anyone - any post from whoever may contain vital information.

Nobody else recently has posted factual new news on things that could effect SEO - I have - and they say squelch me - never mind - I just hope that people will do their own research and have available to them all the information - positive and negative.

wtf?

Ashley
Its strange that Packaging Automation Ltd new rolutionary New Laser Sealing has been tested for the past three years and not one of their 22 machines have it fitted they all have the heat seal method, may be its because they cannot retro fit it, and that they have to make new machines at extra cost.
SEO did say that they would see off any opposition with lower cost.

Thanks Ashley for the info and driver for the comment. Worth knowing what's out there to help form our own evaluation of SEO's claims. We should continue to monitor the laser sealing option.

SD

II & Ashley,

Well done sirs....keep up the sterling work!

Maybe a case of VHS/Betamax!!! Maybe not!!!

I feel the time is very near, and nothing to the contrary seems to offer as much potential.

Please keep up the alternative research and keep us posted.

I noticed that Stanelco made a posting - is this the real stanelco - or just someone posting as stanelco?.

If the real Stanelco - then welcome aboard - and its great that you are watching what is happening on the outside. You will also recognise that Bosley, Eric & GF are probably better than your own marketing team - and maybe you should offer them a role!! If not - then you are confusing me (I know -easily done!!)

Baza

Taken from another thread & answered more comprehensively a few weeks back when the same concerned person threw it into the pot:

paulmasterson1 - 7 May'05 - 13:22 - 38141 of 38156



Hi All,

As for the laser welding, I thought I had quashed that drivel 2 weeks ago, when I posted here that I had recieved e-mail from SEO HQ, stating that laser welding only works on CPET, that's it, end of story, no tray lidding or sealing of ANY OTHER PLASTIC, and NO theromoformed packaging, and on top of that it IS TOO EXPENSIVE ANYWAY, and so IT'S A NON-STARTER !!!!

Forget it !!!!

And filter the FULL TIME SEO BASHER 'insiderinside' !!!!

Then you won'yt have to put up with his lies, deciet, and total BASHING drivel !!!!

Cheers,
PM

garyble - this one from that other site is also interesting to copy over -

KCprevail - 5 May'05 - 08:56 - 37846 of 38162

Boys will be boys and looks like you are now fighting again. Please take your back stabbing to another thread, I will not filter anyone as I want to read all posts and from all posters for any information whatever it may be, filtering is akin to sticking your head in the sand and with your behind in the air, and you know what will happen. I am sorry Mr Paul Masterson (post 37789 of 37839) but I have been reading here for a long time and your comments of you never telling lies is not true, you claimed your web site is Stanelco approved and now Mr White of Stanelco has said this is not true, so you did lie.
paulmasterson1 - 21 Apr'05 - 17:04 - 36063 of 37836
Please feel free to check out my Stanelco Research (Stanelco approved) Website ....
http://www.stanelco.devisland.net
Currently running at over 600 visitors per week !!!!
Please pass on the details to your friends :)
Cheers,
PM
paulmasterson1 - 21 Apr'05 - 18:29 - 36080 of 37836
You want the facts, go to http://www.stanelco.devisland.net the website that Stanelco HAVE APPROVED, and will soon LINK TO, when the new official website is rolled out !!!
.

"Having taken this thread offline (SharesForum April 25th 2005) for a day whilst I spoke to Howard White (Stanelco Executive Director), I can now bring it back online having edited/moderated several posts.
I can confirm that the stanelco@aol.com email address is correct.
However, Mr White confirmed that Stanelco have NOT given their approval of Paul Mastersons website. They may link to it, however, providing the content remains of a factual nature, which Mr White believed it did the last time he looked at it (which was not recently, however).
He said I could quote Stanelco's view towards the aforementioned site as a benign one. They do not approve of people aggressively promoting the stock and do not wish to be associated with such actions."

From my contacts Mr Robert Duggan of Stanelco (Director and Company Secretary) was also contacted and he gave the same comments as above that your website is NOT approved by Stanelco, which my contacts have copied the email to me, also noting that the stanelco@aol.com investor relations email will be changed very soon to investors@stanelco.co.uk
I write the above as I was tricked by you for a time into believing your site was Stanelco approved, and for which I now despise you. I have sold recently and will observe only now. Since Mr Whites comments you have stopped claiming that your website is approved and also stopped the constant posting of misleading figures in general, now it seems you are out to slander BPRG and argue on the Stanelco thread about BPRG.
The most relevant research is the latest report from KBC Peel Hunt who are the broker for Stanelco. Mr Duggan also stated that KBC are the official company brokers.
http://www.kbcpeelhunt.com/pdfs/Stanelco22Apr05.pdf
Mr Duggan also advised in that email I have a copy of, that investor relations advice is received from Financial Dynamics, the contacts are Mr Jonathon Brill and Mr Billy Clegg, 020 7831 3113
I will return to watching and reading, but please try to keep petty arguments off of this thread as I will not use a filter on anyone, just nice to keep things Stanelco related for us watchers and not a loud mouthed argument over BPRG.
As much as I would wish to filter you Mr Paul Masterson, I will not as filtering is stupid and as I want to see what other lies you may be perpetrating on this board.
Kathy C.

II, who are you and what do you want out of all this?

Nothing markusa - just to allow people the information to do their own research.

Garyble - in reply to the post on Laser / CPET - which I have yet to see any official notice of laser only being able to be used on CPET you must remember -

SEO trials were also on CPET

LONDON (AFX) - Stanelco PLC said an ASDA product packaged using Radio
Frequency Technology will appear on the supermarket's shelves from today.
The RF applications group said this follows a trial with ASDA for its high
integrity sealing of Microwaveable Food Trays (CPET). Under the shelf life
trials the group said both microbiological and organoleptic tests produced
encouraging results. Chief executive Ian Balchin said he looks forward to progressing the relationship with ASDA towards a long term commercial agreement as soon as possible.

You have to use CPET for ready meals as APET is not microwavable or able to be used in a normal oven - the green issue is to replace bad PVC with CPET/APET.

II, who are you and what do you want out of all this?



Nothing markusa - just to allow people the information to do their own research.

We have done how research, and it all looks good, so just piss off.

Sorry , should not have replyed to im, its what he wonts to take over the thread and he gets payed by he's boss for every reply he gets, so new posters ignore im.

II,

Thanks for the response, albeit sitably polarised and infernally repetitive.

I will now follow the advice of the wise:

YOU ARE SQUEKCHED!!

Insider, I have checked what you are saying about this new laser sealing for tray lidding and it appears you are correct and I have found further information

http://www.packtalk.com/news/ppa/ppa102.html

From what I can see you are also correct in saying the Stanelco trials were on CPET, this was mentioned in the AFX news release as you say.

I find your posts most interesting so please continue to post, I normally am only a reader, however as quite a few people are giving you a hard time, you have my vote of confidence and thanks so please keep up the good research work !!! I am a Stanelco holder, but will be taking my profits sooner rather than no profits later.

Charles1952 / II same person? Bit like the multiple personalities on the Alexander Mining / Kenmare threads. Good for a laugh if nothing else!

"I am normally only a reader" - err, I think you mean "I've never posted before". Funny your first post, so bravely made, supports the most well-known tosser on the boards. - Squelched.
SD

Charles - thanks and thanks for the new link - its added to my latest offering. I have loads of info on tray lidding and developements - I will not post them all at once as people will accuse me of dominating and taking over the board - so keep an eye over the next few days for more info.

As many people seem unaware of the tray lidding industry - let me shed some light on it and allow some more research links -

Packaging Automation is the company that has been working on Laser Sealing reference to this news in APRIL 2005

http://www.foodproductiondaily.com/news/news-ng.asp?n=59398-laser-sealing-could

http://www.packtalk.com/news/ppa/ppa102.html

If you wish to know more about tray lidding/sealing - sealing machine speeds new models material types used for tray lidding I would suggest this for reference information

http://www.pal.co.uk/materials.php and the other links on there.

Its all good research information on tray lidding and very much information to be used whilst considering SEO future potential I have as yet seen no official proof that Laser can only be used on CPET just an unofficial comment from one BB poster which considering his past posts cannot therefore be believed. It is also worth noting that for any ready meal that has the option of standard oven cooking it must use CPET.

CPET and APET are both polyester types - the difference is that a CPET packaged ready meal can be cooked in a Microwave Oven or normal Oven (where you just put a few holes in the lid and chuck it in) whereas APET (like PP) is not suitable for Microwave or Oven cooking (where you have to remove the lid or the entire contents then cover it again then cook it not such a quick meal then is it too many processes and dirty dishes)

SEO trials were also on CPET

LONDON (AFX) - Stanelco PLC said an ASDA product packaged using Radio
Frequency Technology will appear on the supermarket's shelves from today.
The RF applications group said this follows a trial with ASDA for its high
integrity sealing of Microwaveable Food Trays (CPET). Under the shelf life
trials the group said both microbiological and organoleptic tests produced
encouraging results.
Chief executive Ian Balchin said he looks forward to progressing the
relationship with ASDA towards a long term commercial agreement as soon as
possible.

Most of the ready meals I buy are all CPET (chuck it straight in if fact never had one thats APET and you have to go about removing everything).

The BIG green issue is to replace bad PVC with CPET/APET.

this thread is turning into a f**king joke!!
charlieboy, as driver said , laser sealing has been around for years. why hasn't asda gone into trials with pa? with all this competition around why were asda so quick and keen to do business with seo? at the agm seo said they were dealing with asda because they were the first to talk money. to me that says the other supermarkets were also keen and talking to seo. seo said they hoped for april, now it's may. big deal!!! i would rather things took longer and everyone was happy . it makes a great deal of sense to make sure everything is right as there is so much more that can come from dealing with asdawalmart. let us not forget that last year certain people were saying that seo were finished, then it was said that bprg would swallow seo, then that bprg would be talking 15% of seo. we were told that seo were a one horse company and without ingel seo was nothing. when the trials with asda were announced we were told there would be no deal because of electrical interference , that the technology didn't work. each and every time these people have been wrong! the trials were more than successful, there were no problems with the technology. the asda deal is signed! products using seo greenseal are on the shelves in asda and the buggers are getting it for free! no wonder they want to drag things on!!seo are a company with a lot going for them . there is a downside , as there is investing in any company. but isn't that the point. you do your own research, evaluate, and decide. lots of us did that when seo lost 30% in a day , the price dropping from 6p to 4p. most people who were posting when the price was 4p are still posting , still holding, having added continually all the way up to todays price. if you are evaluating seo , please do your own research. there is much competition but seo are the company asda are dealing with. all we are waiting for is an rns confirming the start date. seo are the ones training engineers from america and europe ready to roll out greenseal. and it's seo that have a stable full of other horses that are ready to run.

Insiderinside, nobody does nothing for nothing, you have an alterial motive, consider yourself squelched, I am tired of you.