Right click My Computer - Select Properties - Select Advanced Tab - Click Settings button in Performance box - Select Advanced Tab - Click Change button in Virtual Memory box.

I forgot to mention, If you have a second physical hard drive (as opposed to a second partition on your main HDD) then put your page file on that disk.

OPTO
They are set to initial size 3067MB, Maximum size 4092MB. You suggest setting to 1000MB?

With the intention of speeding up my machine, I'm interested in doing this page file thingy too, Optimist.

If you were to put the page file on a separate disc drive, (ie, other than on drive C or on a partition) then what if the PC should go wrong or you forget that you've done this thing?

I'm thinking, if my computer goes wrong 6 months to a year down the line, well, I'll take it in to be repaired. But I'll forget I've done this for sure! And the repairer wouldn't think to find out if my PC has a missing page file on Drive C or not, would he?

I think that to put the page file on a second drive, that's even external to the PC itself, might be a bit too far advanced for me to do because of my own crap memory. I reckon I need a memory page file, sorta kinda, myself.

:-)

A page file of 3G or more may comply with the rules that Windows uses to calculate the optimum size (a multiple of the installed RAM) but would be totally impractical even if 32 bit Windows could use that much, which I doubt.

Virtual memory was invented to get round the problem of not enough RAM in the days when extra RAM was prohibitively expensive. It takes at least 200 times longer to access virtual memory than normal RAM so the best bet is not to use it at all.

Unfortunately, Windows likes to have at least a small page filein order to run so you may as well give it 1 GB or so just to be on the safe side but if you ever manage to use it all then you will have stopped your computer. If you don't believe me then try opening a mere couple of hudred photographs at once and see what happens.

Any page file that you have is best run on a seperate hard drive than your main one because otherwise the same disk will be tryng to read the operating system and the page file at the same time. The file also needs to be contiguous as far as possible. Many defrag programms will not defrag the page file (the paid for version of Diskeeper will) but you can get round this by reducing the file to the minimum, defrag the disk and then reinstate the page file.

Unless you have an external SATA or possibly a Firewire connection, it is not worth running a page file on an external disk because these are significantly slower and in any case, Windows may not allow it.

If you have your page file on a secondary disk and then remove it, the worst problem that you will get is that Windows will not start because it needs a swap file. All you need to do is start in safe mode and reinstate it. If you are really worried about that possibility then leave a small (30MB) page file on your C Drive.

I you wonder how much memory your PC can take and the type and size of the memory chips then see this site which will scan your PC and tell you the details

http://www.crucial.com/uk/systemscanner/index.aspx

Well I've done something stupid again, and I seem to be thicker than usual.
Having been bugged for most of yesterday with threats to re-start my machine in order to install updates, I finally let the updates have their wicked way last night.

Only this morning, when I switched on again, my second screen didn't light up. (Heck, I'm shortly going to 4 screens, and I can't even manage 2)
So I've diddled about with the screen settings, and although the 2nd screen is alight now, mousie doesn't want to go there - and basically, it's blank.
I mucked about too much with the settings, because now I don't even have the option to revert to the previous setting, which was multiple screen something or other - now I just have no.2, which is generic PnP monitor on 256MB ATI radeon X1300 Pro.

I don't even know why the updates upset everything in the first place - these are the ones:

Cumulative Security Update for ActiveX Killbits for Windows Vista (KB956391)

Installation date: ‎16/‎10/‎2008 10:49

Installation status: Successful

Update type: Important

Security issues have been identified in ActiveX controls that could allow an attacker to compromise a system that is running Microsoft Internet Explorer and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkId=125345

Help and Support:
http://support.microsoft.com

Update for Windows Mail Junk E-mail Filter [October 2008] (KB905866)

Installation date: ‎16/‎10/‎2008 10:48

Installation status: Successful

Update type: Recommended

Install this update for Windows Mail to revise the definition files that are used to detect e-mail messages that should be considered junk e-mail or that may contain phishing content. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkID=79015

Help and Support:
http://support.microsoft.com

Security Update for Windows Vista (KB954211)

Installation date: ‎16/‎10/‎2008 10:48

Installation status: Successful

Update type: Important

A security issue has been identified that could allow an authenticated local attacker to compromise your Microsoft Windows-based system and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkId=121738

Help and Support:
http://support.microsoft.com

Windows Malicious Software Removal Tool - October 2008 (KB890830)

Installation date: ‎16/‎10/‎2008 10:48

Installation status: Successful

Update type: Important

After the download, this tool runs one time to check your computer for infection by specific, prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove any infection that is found. If an infection is found, the tool will display a status report the next time that you start your computer. A new version of the tool will be offered every month. If you want to manually run the tool on your computer, you can download a copy from the Microsoft Download Center, or you can run an online version from microsoft.com. This tool is not a replacement for an antivirus product. To help protect your computer, you should use an antivirus product.

More information:
http://go.microsoft.com/fwlink/?LinkId=39987

Help and Support:
http://support.microsoft.com

Security Update for Windows Vista (KB957095)

Installation date: ‎16/‎10/‎2008 10:47

Installation status: Successful

Update type: Important

A security issue has been identified that could allow an authenticated remote attacker to compromise your Microsoft Windows-based system and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkId=127994

Help and Support:
http://support.microsoft.com

Security Update for Windows Vista (KB956841)

Installation date: ‎16/‎10/‎2008 10:47

Installation status: Successful

Update type: Important

A security issue has been identified that could allow an authenticated local attacker to compromise your Microsoft Windows-based system and gain control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkId=128103

Help and Support:
http://support.microsoft.com

Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB956390)

Installation date: ‎16/‎10/‎2008 10:47

Installation status: Successful

Update type: Important

Security issues have been identified that could allow an attacker to compromise a system that is running Microsoft Internet Explorer and gain control over it. You can help protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided to you and licensed under the Windows Vista License Terms.

More information:
http://go.microsoft.com/fwlink/?LinkId=128060

Help and Support:
http://support.microsoft.com


Short of doing a system restore (and then what will happen about the updates?) - any ideas please?

OK Chocolate

Let's start with the basics and set up for TWO monitors.

One of them needs to be the Primary Display. Let's make this the one on the LHS.

To designate the primary display

1. Open Display Settings by clicking the Start button , clicking Control Panel, clicking Appearance and Personalization, clicking Personalization, and then clicking Display Settings.

2. On the Monitor tab, click Identify Monitors.

The display that is identified by the number "1" is the primary display.

Just in case the monitors have crossed cables and are cabled up wrongly, you can Drag and Drop the monitors, numbered 1 and 2, into the right positions.

3. Click the numbered icon that represents the display that you want to designate as the primary display, and then select the This is my main monitor check box.

4. Click OK.

5. When prompted to keep the settings, click Yes.

Changing the Screen Resolution

Check out: http://windowshelp.microsoft.com/Windows/en-US/Help/0386b009-5f30-45c7-80c8-ff0395cc24091033.mspx

I'd suggest you go for 1024 x 768

To get the best display on your monitor, check out:

Check out: http://windowshelp.microsoft.com/Windows/en-US/Help/617624ee-08f3-4aff-9713-5e84a9674a261033.mspx

Hope that is of some help.

Apparently not.....

Many thanks, Doc :)
Sorry, I stayed out of the office, whilst I spent the weekend cleaning up inside and out after our builder boys finally left to find a new resident coffee maker.

For some reason, swapping the number 1 and 2 finally did the trick.
Err, so now I have everything back to front from the way it was before :)
Like I said, I have no idea why it all went pear-shaped after the updates in the first place!

NetGear Digital Entertainer EVA8000

Anyone know where I can find out if my Toshiba HD TV will work with this?

Also where does it plug in on the TV

It seems to have most output types covered, your TV is bound to have one of them. Your HD television is almost certain to have an HDMI input which you should use if possible. If not then your TV will have one of the other connectors.

The thing that is not mentioned in the spec is what DRM systems it can handle. You could have problems playing DRM protected DVD's on your PC to this box.

If you buy it, try to use the ethernet cable to connect to your PC rather than relying on th WiFi connection.

Optimist, thanks ;-)

Thought the whole idea was it sent the image to TV by wireless so no need for cables, umm

Description

Streams movies, videos, music Internet radio and photos from your home PCs and storage devices to your HDTV.

Automatically finds all the digital media files on your home network and organizes them into an easily accessible library.

As a family, we tend to watch Saturday 3pm Premiership Matches live which are streamed back over the internet from Asian TV channels like Star Sports. There's also a lot of the IPL cricket matches which are broadcast.

Am I correct in thinking that with this little gizmo we could watch it on a TV rather than a PC monitor?

Selftrade have made some adjustments to their site over the weekend (add ons I think). I now can't bring the site up. I've tried from my favourites tag; opening-up a new window and going thr' google all to no avail. I've got rid of all the temp. internet files, history and all cookies and I still have the problem.

Any help would be appreciated.

Richgit69

It will work over a wirless connection, but with an ethernet cable you will have fewer problems with the video freezing or missing frames. Wireless networking just isn't as good as ethernet cables. I looked again at the spec and it does seem to support MS DRM though.

Hllary

I'm not sure whether it will stream from the Internet or not but if all you want to do is output your PC to TV then cheaper options are:- fit a video card with a TV out socket, get a VGA to HDMI cable if your TV is HD, has your TV got a VGA input? or you could buy a VGA to AV adaptor.

Thanks Opti. The biggest problem is that there aren't any PC's near a TV at the moment. I was attracted to the wireless aspect of Richgit's gizmo.

Ty it then it may handle streaming from the net but even if it doesn't you can still use it for music, video and pictures (I still preffer ethernet conections to wireless though).

I am so chuffed with my Develo stuff, which allows me to use my 240v mains as a broadband network. Anywhere in the house, where there is a socket, then I shove in a Develo Homeplug and then that's where I've got 'speed of light' secure hard-wired ethernet broadband.

http://www.google.co.uk/products?q=Devolo+dLAN+200+Homeplug+AV&btnG=Search+Products&hl=en

Here's the supplier I'd go for:

http://www.pyramid.com

Yes, Exec,

I was going to suggest Devolo for that tele thingie.

But beware those of you living in old houses with more than one ring mains. You can waste a lot of trial and error diagnostics if you don't understand the principles.

TP

Being on a different ring main shouldn't stop those devices from working, but if you had two circuits on different phases then the network would not work between them.

Also, your neighbours on the same electrical phase (normally every third house in a street) may be able to get onto yor network.