for more information about stanelco click on the links.

driver's research page link
http://www.moneyam.com/InvestorsRoom/posts.php?tid=7681#lastread
website link
http://www.stanelco.co.uk/index.htm

20.5p I am bid, anyone for 19?

maybe tomorrow,

Seq. are you still short?

yep- target 17p, as it has been for a while

i thought you were closed out last week, or is it rolled over?

hate to say it but i smell an RNS! (probably negative though!)

pt
I also smell one, I thought it was sd, any one seen him latterly.

Me water says an RNS tomorrow!! They like Tuesday annoubcements ??

All very scientific this prediction stuff

Baza

Me water says an RNS tomorrow!! They like Tuesday annoubcements ??

All very scientific this prediction stuff

Baza

you can say that again.

short is open to the 26th.- had to check that, I have been in and out of this thing more times than mastersons` daily ramps, so if you don`t buy some soon lads, @-0.75p down a day, let`s see i`ll be at my target by Friday,

g`luck

Hi All,

The MM's (especially EVO and KBC) know how close SEO are to the completion of the FINAL ASDA trial, they are walking the price down before the news comes out, and getting cheaper stock than they would, if everyone sold on that news.

Don't be suprised to see them push the price back towards 25p on nothing too, because they will be giving themselves a nicer (20%+ ?) profit when the news hits, than they would by leaving the S.P at 20.75

Cheers,

PM

the market makers will decide the price????????


ROTFLMFACB&HO

I have seen some blatant rampers but this twt is a masterb$$^&r, the buys/sells were roughly equal oh braindead one- as they are most days, the mm`s make money from the spread you thick clown

oi! I heard that!

seq
Why do you consider my new thread MDY as a ramp, it is just a new thread like any other. You are becoming a bit of a pain, please remove or edit your post from MDY.

Copied this from another site - I have no way of knowing how good the info is - but iit seems to stack up.

"From wansummoney over on iii

Someone trying to bring us down but hold strong:

News is on its way soon very soon I can explain why the tests have been taking so

Firstly 2weeks are taken by converting the machine or supplying RF machine then they have to do production runs, then the samples get sent to a lab for bug checks and analysis then they get sent somewhere else for further analysis then they have to do anthoer production run for the supermarket and await customer feedback then the results can be released, so far no reports of package sent back, this third trial is taking longer than expected reasons for this will be revealled, then we will understand why (ie it mustb e big), this trial is still on going

(As there not much news this month I expect something before the month is out)

what next oh yes, I don't think the market realises the potential of the SP metals and the Biotec tie up well now we have a new starch polymer which welds under RF we have the capability to produce the trays in volume (think) this is all in place already.

Threat from Laser well short answer is NO, why laser been out for a while and the supermarkets aren't talking about it (ie not interested), also laser melts the plastic giving of fumes, which does who knows what to the food
so theres no chance supermarts going to take the risks

what else oh yes

outside of the UK and Ireland they are in talks ie, with other manufacturers especially in the US and europe, asia not much happening except maybe in japan


What else oh yes

Engineers have been trained the US no idea of numbers but a good number to start the ball rolling, my approx figures are lets say theres 4 in a team and we need 1 RF engineer per team and we have enough RF guys for 10 teams (do the maths)

watch this baby bounce - nuff said "

Perhaps my prediction of an RNS tomorrow is a bit premature - but who knows

Baza

If this drops back any further I'm gonna have to buy in again its whether to get in at 20p or hold tight incase it drops to mystic megs prediction of 17p.

Trend - confirmed - downward - over ramped - over hyped - correcting itself.

Will it be 19p bid tomorrow and 18p mid price in a few days ? Who knows - but its getting weaker and weaker - and with all those orders in the price (around 1000) - but with only 2 got - problems appear to be there IMO - and now Tony R. has done a CYA by saying he would be disappointed if orders next year were less than 200 - which means he is hedging they will not be IMO - SE0 is moving down to where its fundamentials are - what would the price be on a prospective future PE of 20 ? Answer - much lower than it is now - if of course they can make a profit ever. Who knows - lets watch more - very interesting - if no news in the morning I can see this dropping rapidly when the bid goes below 20p - as a move below 20p on the bid will see lots of people getting out quick.

Something big happened IMO when they suddenly reversed and sold half of Biotec - something went wrong and they knew they could not generate the cash needed for the long term payment plan of Biotec - so they panicked and sold half - if they had a plan to sell half they would not have bid against Biotec and cost both companies more money than if they had agreed a lower price at the start. Stanelco agreed a massively high fee for a loss making company - then panicked IMO owing to something happening - and then went back to SP and sold half - that was a key sign of something going badly wrong in the long term plan IMO.

The above is IMO - so DYOR.

New RNS out,agreement with Mondini to purpose build machines.
It just gets better.
cyril

Stanelco PLC
19 July 2005

19th July 2005



Stanelco confirms Mondini as Partner in

Development of new GREENSEAL(TM)RF sealing tray lidding machines



Stanelco plc ('Stanelco' or 'the Company'), the RF Applications Group, is
pleased to announce that it has entered into a commercial agreement with G
Mondini Spa, a world leading manufacturer of tray lidding machines, to jointly
develop a purpose built 'RF' tray lidding machine using Stanelco's GREENSEAL(TM)
technology.



The agreement is the first by Stanelco with an original equipment manufacturer
(OEM). This is an important development as it should allow Stanelco to supply
its technology to food packers as part of new OEM machines as an alternative to
retrofitting existing machines. By further improving machine reliability and
lowering costs, it will greatly speed up the acceptance of the GREENSEAL(TM)
technology as an industry standard within the packaging industry.



The new machine will initially be made available to suppliers of ASDA Stores Ltd
(ASDA) in the UK and Ireland in accordance with an Agreement between Stanelco
and ASDA.



Ian Balchin CEO Stanelco plc commented, 'We are delighted to be working with G
Mondini and expect the first purpose built new machine to be supplied to an ASDA
supplier that has recently completed successful trials of GREENSEAL(TM)
technology using retrofitted equipment. Other trials of GREENSEAL(TM)technology
and our biocompostible food tray material provisionally named Starpol2000(TM)
are all progressing extremely well. We are also making excellent headway with
our patent protection program in a field where there is little pre-existing
patented technology.'




Giovanni Mondini President of G Mondini Spa commented, 'We are delighted to
enter into this association with Stanelco. The combined experience and expertise
of two market leaders in sealing technology will accelerate the radical
modification of tray sealing across the world.'



- Ends -

Like the end piece, will accelerate the radical modification of tray sealing
"ACROSS THE WORLD"
CYRIL

what is it about Tesdays? Good news, what we needed.