There are loads of ways.

It depends whether or not you want to keep the bckup data then you need to copy it to another disk.

I suggest that you get hold of a copy of Paragon Partition Manager which can handle backing up the disk image, deleting it and resizing the C Drive.

If you're using Vista or above you can delete and resize partitions in Administrative Tools/Computer Management/Disk Management but PPM is easier and you should be able to gwt a free copy.

Thanks Optomist. I'll give PPM a try.

I've locked up a computer.
It is an old but very stable comp on win 2k.
Went to use the floppy and discovered the data cable was not connected.
Connected what was obviously the wrong plug on the cable, as on powerup
got the message "Disk boot failure,insert system disc and press enter"
Disconnect floppy. Same result.
Connect correct cable. Ditto.
Tried win2k cd and rescue foppy on powerup.
Does not read either.
Can load Partition Magic from floppy which takes me to
a DOS prompt for the A drive, but I dont know what command to
enter (or if I can recover this way)
Any help much appreciated.
Tks.

tyketto

I've not used Partition Manager from a boot floppy so you will have to dig out the help files but my guess is that you have three basic options. Copy the entire disk to backup, check and repair the disk and repair the boot sector.

It's a good bet that all you have to do is repair the boot sector, but if there is anything important on the disc then you need to do the first two first.

The easiest way is to remove the disc from the machine and mount it on another computer. It will then be easy to copy the entire disc and running "chkdsk /f" will probably fix it.

Edit

Have you checked that the book sequence in the BIOS is set for Hard Disk 1st?

Thanks Opto.
I cannot access the computer at all, except via the flopy.
Am a complete dumbo so do not want to crash this comp.
I am waiting for another computer to arrive, so I'll wait for
it before I start messing with this one.This one is
on XP. If I add the Win2k disk to this machine will it give me
an option of OS when I boot up?
I thnk it was HD,CD, A.
Tks
mac.

tyketto

Dual booting is possible but can be interesting to set up. In any case, the disk from your Win2K machine needs to be fixed before it will boot and W2K would most likely have to be reinstalled in order to run on the new machine. The old disk is almost certain to be significantly slower and potentially damaged.

Assuming that you have plenty of disk space on the new machine, just copy all of your data from the old disk. If you need the W2K OS then try installing it in a diffferent directory and dual boot or download Microsoft Virtual PC and install Win2K on a virtual machine.

Anyone got a recommendation for a wireless keyboard?

What I'm looking for is a layout exactly the same as a standard UK keyboard - iefull size function keys in groups of 4standard 6 movement keys above the cursor cluster, in the same order: insert/home/pg up and del/end/pg dn. Not 2 columns, not a giant delete key, just the normal layoutDecent sizes legs at the back to adjust the tilt. Not piddly little legs, not no legs at all, but normal 10mm-ish legsMust work with a Logitech MX revolution mouseMust not break after 1 week of use (I'm looking at you, shitty pcline keyboard - nice layout, but utter rubbish)must have proper key-travel, not tiny little laptop keytops with 0.1mm travelmust not be some gigantic monstrosity designed to appeal to brain-dead teenagersDoes this product actually exist? I've looked at all the Logitech models (all fail for one reason or another, mostly layout and appearange), the Microsoft ones (mostly fail for layout), and some others (fail for various reasons - size, tilt-legs, being utterly rubbish).

Any ideas? What I want is basically a wireless version of the MS Keyboard 500, but all their wireless ones have layout flaws - piddly little function keys, buggered-around movement key layout.

Help?

The Logitech Cordless 110 that came with my Computer Doctor PC seems to fit your qualifications. Whether it is still on the market I cannot say. I bought mine just over a year ago.

TP

I echo the comments about Logitech wireless keyboards & mice. I have one that's a couple of years old, and it's a really nice bit of kit.


Optimist

Got that HP server with an Opteron processor. My PC man who's doing the XP install for me is complaining like mad about the fact that I bought a server - but he's a bit full of himself usually - is he clucking unnecessarily? He's got XP installed OK, and is just updating before I get the machine installed on the network.

SC

I doubt that you will have any problems. The biggest difference between a server and a workstation is in the OS and Win XP is a workstation.

Bottom end servers are basically workstations with cheaper graphics and sound capability which most people you don't need. If you do then you can always add a couple of expansion cards.

Bottom end servers are basically workstations

You suggesting I'm a cheapskate? I've never been so insulted!!!

;-)

Thanks Opti, that's what I thought. He was clucking on about it being Opteron and was 64 bit whereas XP is 32 bit, and I wouldn't be able to add any more hard drives. I told him that I had absolutely no intention of adding hard drives, and I was happy with the spec, but he does like to complain about how difficult I've made it for him ;-)

SC

One thing that you can always do with a server is to add more hard drives and most modern CPU's support 64 bit.

Thanks, looking forward to it now.

SC,

I think your PC man is making a big song and dance about nothing. If you can live without the sound card (I'm more than happy to!!!), the HP ProLiants are really nice machines imo.

We're also thinking of getting a couple more of them for the kids to use, although we'll no doubt have to utilise the sound cards from their current machines otherwise they'll think it's the end of the world as they know it!

The only headache was finding a suitable driver for a widescreen monitor as the installed driver was a bit naff. I'm sure you'll be very pleased with your machine.

Thanks Hils. I would have done the install myself but I really haven't got time, and he will be adding it to the network, plus some other general maintenance and tweaking / moving / adding some other machines that need linking in, so there's a lot to do and it will take him half the time than it takes me.

edit: I'm adding a Matrox twin head card for graphics, as it will also run my computerised test chart (not for trading!) so the graphics shouldn't be a problem.

I'm using Outlook 2003.

I have just noticed that I have a Contacts folder with 1087 items.

I also have one called Contacts in Personal Folders with 1057 items.

I don't need two and would like to combine them without creating duplications.

Any clues, chums?

TP

Optimist,
Ref posts 8441/43.
Fixed it by putting the HD in the fridge for about 24hrs.
Lost some passwords but everything else OK.
Tks
mac.

TP

I suspect that most of them are duplicates created when you upgraded Outlook.

The Outlook file Import /Export routine has a de duplication option. Create a new temporary contacts folder and copy the contents of one of your folders to it. Export the contents of the other one to a temp.pst file and then import that file into your temp folder selecting the don't import duplicates option. Once you have them right, delete the contents of the existing folders and copy the merged details to the one you want to keep.

A good way to check that your contacts are correct is to export the folder in CSV format and load it into Excel.


Mac

I'm glad that you were able to sort it, but make sure that you scrap the disk once you have all of the data off it.

I'm looking to replace my ancient HP720c inkjet printer. I've got a few in mind - HP Photosmart C4580, Canon IP4600 inkjet printer, Canon Pixma iP4700 or iP4600. Any other recommendations or opinions?

Will be used mainly for text printing with the occasional graphics stuff (photos, son's school work,etc).

Opt,

Should I be looking at my 'profile'? I saw references to it when I Googled my problem.

Thanks for the advice. I'll pursue it when you give me a view on the above.

TP