Optimist, thanks. I'm sure that's it having thought about it. I connected it to father-in-law's security enabled wireless router and the problem has occurred since then. I'll make mine the same security key as his and that should do it - running the same router. Will report back :-)

7thFloor, I would not place much reliance on the PC Pitstop or Visualware results since their servers are in the US and transatlantic bandwidth will play a part. ADSL Guide (at http://www.adslguide.org.uk/tools/speedtest.asp) is UK based and pretty reliable, BT will be the most reliable but excludes the ISP effects.

Try ADSL Guide and BT at night (after 11pm) and they should approach 1800-1900 kbps. You'll never get the maximum 2048kbps since there is overhead in the TCP protocol. During the day it will tend to vary down from the maximum but if you are getting 1426 kbps consistently I would certainly complain.

Ensure however that before you try the speed test you close all running windows and anything that might be using the internet.

7th floor, I would also normally recommend adslguide.org for the same reasons as Kayak but have found that their speed check wasn't working for me today. Hope you have better luck.


Neil

adslguide speedcheck seems to have been very overloaded recently, it often says its not available due to max number of tests being run, i agree with the others thats its about the best quick checker.

Another lap top gone tits up!
Got one with a blue screen, a load of technical mumbo jumbo preceeded by "kernal_data_inpage_error"..cant keep throwing these poxy lap tops away, must be me?
This ones a Dell Inspiron 8500
Got this problem before on one i chucked, was told by the guy in the shop "it was probably caused by a device driver"..i just said thanks and walked out none the wiser, is it fooked or can i cure it, it wont even switch off?
Please answer in a style to be understood by a simpleton!

Optimist, all sorted now. Have used the same security code as my father-in-law's wireless router - problem occurred because it was the same type as mine but the laptop couldn't differentiate between them.

SC

I'm glad your sorted. Make sure that all of the wireless access points have a different and non default SSID. This will enable your laptop to distinguish them.

Dailos

I will happily take that laptop off your hands ;)

More seriously, it is most likely a fairly minor disc error that has caused the problem. You could probably repair it with the installation/recovery CD and still retain your data. I would expect the worst case to be a complete format and reinstall or possibly a new hard disk (less than 100).

Edit.

If you do use the recovery disc, this wil restore the system to it's original state, no recent security updates and possibly pre SP2, try to connect to the internet behind a firewall untill you get the system up to date.

Dailos:

A very old rule for computer techies to remember is:

"To the ordinary user, most software problems look like hardware problems."

It's a 90%+ bet that you simply have a screwed up piece of software.

Otherwise, it's a relatively easily sorted disk problem. The message will be "KERNEL_DATA_INPAGE_ERROR" (two E's in kernel as in kernel of a nut, the core of the operating system).

"The guy in the shop" is frequently clueless, IMHO.

Which OS are you running, Win XP, perchance?

Let me ask my engineers tomorrow . . .

Cheers

MM

Kayak. Thank you for the link, it has set my mind at rest.

Your Connection
Direction
Actual Speed

Downstream 1852 Kbps (231.5 KB/sec) True Speed: 2000 Kbps (inc. overheads)
Upstream 242 Kbps (30.3 KB/sec) True Speed: 261 Kbps (inc. overheads)


'Actual Speed' is the amount of useful data that your connection can transmit/receive per second.

Dailos, these techies know nothing. Your laptop is stuffed. Send it to me and I'll happily confirm this by examining it and reporting back. It won't be worth posting it back to you so I'll dispose of it carefully.

Dailos,

If you're in the Reading area, and can drop your laptop off with us at IST, we'll have a look and see if we can get you on the air again. If we have to buy any bits, you can pay for those and, er, a large glass of wine for me in the local hostelry.

Mail me via MAM.

Cheers

Derek
--

Spoilsport!

Optimist: thanks for the reply

Mighty Micro: thanks for your help and kind offer, am having a week of drunken fun at Cheltenham races and have taken the lap top into a dodgy shop in Oxford. Man in there said "i'll sort it out for 60 quid cash mate" i said my goodbye to the lap top as i left!

Seymour: you aint having it! :-)

Neither are you Dalios from the sound of it! :-)

Got 2mb Of PIPEX Today.Is this reading ok?

Downstream 1355 Kbps (169.4 KB/sec) 1463 Kbps (inc. overheads)
Upstream 150 Kbps (18.8 KB/sec) 162 Kbps (inc. overheads)


Re started Router now.

Downstream 1763 Kbps (220.4 KB/sec) 1904 Kbps (inc. overheads)
Upstream 238 Kbps (29.8 KB/sec) 257 Kbps (inc. overheads)

Second one is about right, a little low perhaps.

What should it be and how can i get it faster?

Down stream 1647 Kbps (205.9 KB/sec) 1778 Kbps (inc. overheads)
Upstream 238 Kbps (29.8 KB/sec) 257 Kbps (inc. overheads)

What should it be?

The above is after DR TCP!

Iain, this is mine with PlusNet.

Downstream 1841 Kbps (230.1 KB/sec) 1988 Kbps (inc. overheads)
Upstream 242 Kbps (30.3 KB/sec) 261 Kbps (inc. overheads)

It will be a bit variable during the day though depending on the ISP. As the speed gets higher you are more susceptible to second-by-second changes in network congestion. To get the maximum possible speed reading, test in the middle of the night!

In Dr TCP, MTU should normally be set to 1500, RWIN to 38400 is plenty.

If you are confident in editing the registry I highly recommend these two registry tweaks (assuming you have Windows 2000 or XP):

Maximum simultaneous connections in IE (drastically increases speed of loading of webpages)

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings

Set MaxConnectionsPer1_0Server and MaxConnectionsPerServer to 16 decimal.

RWIN (does what Dr TCP does):

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

Set TcpWindowSize to 38400

Cheers Kayak:Ill do that when I get in.
Many thanks
Just checking on the system here(Win 2000)do i have to enter the numbers in Binary?
Im using WIN XP PRO